BiLevel device Hoffrichter with Aquapoint2 Humidifier and Nasal Mask COZY

Code:
675
Weight:
4.000 Kgs

The product is not available anymore!

BiLevel device Hoffrichter with Aquapoint2 Humidifier and Nasal Mask COZY

The device generates two pressure levels in the S-, ST- or T–mode via an electrically controlled turbine.

Switching from one pressure level to another is realized via a quick change of the revolutions of the fitted high-performance blower to keep the stress for the patient as low as possible.

S-Mode

Spontaneous trigger – the change from one pressure level to another is triggered by starting respiration of the patient only. A decline in pressure to the set lower pressure level also occurs once the inspiration flow ends.

ST-Mode

Spontaneous breathing and Time – as long as the patient is breathing independently the device is operating in the S-mode. Once the patient stops breathing the device automatically switches into the T-mode and provides respiration for the patient in the prescribed safety frequency. The delay time after which the device switches into the T-mode can be set.

T-Mode

Time respiration with prescribed, set inspiration time. If the trigger function is deactivated the patient is ventilated according to the set parameters. If the trigger function is activated the device accepts only spontaneous trigger signals in the expiration phase.

3 FLEX-Levels separately for in- and expiration
Data management on SD-Card
Remarkable low noise level
Battery operation possible
Tidal volume display

Specifications:

	Range	Steps	Point2 BiLevel ST20
Pressure	4 hPa – 20 hPa	0.5 hPa
P-Ramp	4 hPa – Pressure - IPAP	0.5 hPa
P-Min	4 hPa – P–Start	0.5 hPa
P-Max	P–Start – 20 hPa	0.5 hPa
P-Start	P-Min - P-Max	0.5 hPa
I-FLEX	0 - 3	1 step
E-FLEX	0 - 3	1 Step
IPAP	EPAP – 20 hPa	0.5 hPa
EPAP	4 hPa – IPAP	0.5 hPa
I-Slope	1- 3	1 step
E-Slope	1- 3	1 step
Frequency	5 – 30 bpm	1 bpm
I:E	20 - 80 %	1 %
Delay Time	0 - 20 s.	1 s.
S-Frequency	On (10 bpm) Off
Mask	Nose/Nose- Mouth/Pillow
Start-Stop Automatic Calibration	Start via ENTER
Automatic	Start-Stop/Start/Off	10 min.
Mask Test	0 - 90 s.	5 s.
Ramp	0 – 45 min.	5 min.
Display Vt	On / Off
Бактериален филтър	Да / Не
Brightness	0 - 100 %	10 %
Language	deu, eng, ell, spa, fra, ita, nld, tur, plk, por, cze
P- Unit	Hpa/mbar/sm H2O
Power	Counter
Blower	Counter
Filter	Counter
Therapy	Counter
Date	Day-Month-Year
Time	Hour-Minute
Waketime	Hour-Minute

Technical Data:

Dimensions:- 170 mm x 220 mm x 95 mm (W x L x H)
Mass:- 1.51 kg
Power supply:- 100 V - 240 V AC, 50 - 60 Hz
Power consumption- < 17 W
DC operation - 24 V DC / 2.1 A (max.)
Battery operation - 2 x 11.1 V / 2200 mAh
Pressure range - 4 - 20 hPa (mbar)
Pressure variation- < 0.5 hPa without humidifier; < 0,9 hPa with humidifier
Noise level - < 30 dB(A) at 10 hPa

Functions:

Counters- stand-by time, turbine running time, therapy time, filter age
Permanent display- pressure, bargraph, Date, time, softstart ramp, alarm clock tidal volume (Vt), battery charging symbol, pressure unit (hPa, mbar, cmH 2O)
Comfort functions- start-stopp-automatik, softstart ramp, leakage test, mask calibration, flex pressure adjustment I-Flex / E-Flex, automatic start after power failure, date-, time and wake-up function, mask alarm.

SD-Card

Therapy data	Internal	SD card
Central apnea, obstructive apnea, mixed apnea, hypopnea	saved	saved
Airway constriction, snoring, hyperventilation	saved	saved
Leakage	saved	saved
Base Pressure	Only saved, when I- Flex or E- Flex are selected, but not active	Only saved, when I- Flex or E- Flex are selected, but not active
Therapy Pressure (low resolution). No FLEX pressure changes visible	saved	not saved
Therapy Pressure (high resolution), respiration flow, relative respiratory volume. FLEX pressure changes visible	not saved	saved
Storage Time	</= 30 days	</= 2 years

Aquapoint 2 (Not Included)

Dimensions-(w x l x h) 100 mm x 145 mm x 109 mm
Mass approx.- 280 g (without water)
Power supply- 24 V DC
Power consumption- 0 - 22 W
Heating levels- 5 stages + off
Max. filling capacity- 220 ml

Powerpackpoint 2 (Not included)

Dimensions- (w x l x h) 160 mm x 45 mm x 70 mm per battery
Mass approx.- 300 g per battery
Power supply- 11.1 V DC per battery
Capacity- 2200 mAh per battery

Filter system point 2

Dimensions- (w x l x h) 153 mm x 45 mm x 31 mm
Mass approx.- 50 g
Coarse filter- Polyurethan on polyester based 80 ppi (pores per inch), 30 kg/m³ (material density)
Fine filter- Polypropylen Precipitation of particles ≥ 1 µm: ≥ 89% at ω ≤ 1 m/s (particle velocity) ≥ 99% at ω ≤ 0,2 m/s (particle velocity)

Nasal mask COZY Vented

An interface is a device or system that unrelated entities use to interact.

However, it seems important in Continuous Positive Airway Pressure (CPAP) or Bi-level CPAP (BiPAP) treatment due to most CPAP or BiPAP users start out with a basic mask design that is recommended by their doctor or respiratory therapist. As the user gets used to sleeping with the CPAP or BiPAP machine, they may find the masks are unable to adjust the mask enough to minimize air leakage, maintain the prescribed air pressure and maximize comfort. Understanding the importance of interface, we designed the masks with various features and also defined them into three different levels. The Cozy brings the mask constructions into a simple way, with a patent pending assembly method, Cozy has a much easier way to attach and detach the silicone cushion from frame.