• BGN
  • USD
  • EUR
  • GBP
  • DKK
  • MXN
  • NZD
  • NOK
  • PHP
  • PLN
  • RON
  • SGD
  • ZAR
  • KRW
  • SEK
  • CHF
  • THB
  • TRY
  • JPY
Home CPAP devices and masksAutomatic CPAPAuto CPAP Point2 Hoffrichter with Humidifier Aquapoint2 and Nasal Mask COZY

Auto CPAP Point2 Hoffrichter with Humidifier Aquapoint2 and Nasal Mask COZY

  • Code:
  • Weight:
    3.000 Kgs
The product is not available anymore!

Auto CPAP Point2 Hoffrichter with Humidifier Aquapoint2 and Nasal Mask COZY

Auto CPAP Point2 Hoffrichter with Humidifier Aquapoint2 and Nasal Mask COZYAuto CPAP Point2 Hoffrichter with Humidifier Aquapoint2 and Nasal Mask COZYAuto CPAP Point2 Hoffrichter with Humidifier Aquapoint2 and Nasal Mask COZYAuto CPAP Point2 Hoffrichter with Humidifier Aquapoint2 and Nasal Mask COZY
Point 2 AutoCPAP
Within a certain pressure range the device automatically controls the therapy pressure depending on the occurrence of respiratory events. In sleep phases with no events the therapy pressure is lowered. Starting obstructive events are treated effectively with a slight pressure increase. For a high therapy comfort the therapy pressure should always be only as high as necessary and as low as possible.
  • 3 FLEX-Levels separately for in- and expiration
  • Data management on SD-Card 
  • Remarkable low noise level 
  • Battery operation possible 
  • Tidal volume display
The device can recognize the following respiratory events:
  • Obstructive apnea
  • Hypopnea
  • Central apnea
  • Snoring
  • Normal respiration
  • Increased airway resistance
The identification of the different respiratory events is achieved via 3 channels:
  • Measurement of any constriction of the respiratory tract
  • Detection of flow limitations by measuring the flow 
  • Detection of snoring with the help of sound detection
The combined analysis of all results facilitates a very precise differentiation between obstructive and central events. The device adjusts the therapy pressure according to the detected events as described below:
  • Increase of pressure for obstructive events
  • Decrease of pressure for central events and normal respiration



  Range Steps Point2
Pressure   4 hPa – 20 hPa  0.5 hPa  
P-Ramp 4 hPa – Pressure - IPAP 0.5 hPa
P-Min 4 hPa – P–Start  0.5 hPa
P-Max P–Start – 20 hPa 0.5 hPa
P-Start P-Min - P-Max 0.5 hPa
I-FLEX 0 - 3 1 step 
E-FLEX 0 - 3 1 step
IPAP EPAP – 20 hPa 0.5 hPa  
EPAP 4 hPa – IPAP 0.5 hPa  
I-Slope 1- 3 1 step  
E-Slope 1- 3 1 step  
Frequency 5 – 30 bpm 1 bpm  
I:E  20 - 80 % 1 %  
Delay time 0 - 20 s. 1 s.  
S- Frequence
On (10 bpm)
Mask Nose/Nose- Mouth/Pillow  
Start-Stop Automatic Calibration Start via ENTER  
Automatic Start-Stop/Start/Off 10 min.
Mask Test 0 - 90 s. 5 s.
Ramp 0 – 45 min. 5 min.
Display Vt On / Off  
Bacterial Filter Yes / No  
Brightness 0 - 100 % 10 %
Language deu, eng, ell, spa, fra, ita, nld, tur, plk, por, cze  
P- Unit Hpa/mbar/sm H2O  
Power Counter  
Blower Counter  
Filter Counter  
Therapy Counter  
Date Day-Month-Year  
Time Hour-Minute  
Waketime Hour-Minute  



Technical Data:

  • Dimensions:- 170 mm x 220 mm x 95 mm (W x L x H)
  • Mass:- 1.51 kg
  • Power supply:- 100 V - 240 V AC, 50 - 60 Hz
  • Power consumption- < 17 W
  • DC operation - 24 V DC / 2.1 A (max.)
  • Battery operation - 2 x 11.1 V / 2200 mAh
  • Pressure range - 4 - 20 hPa (mbar)
  • Pressure variation- < 0.5 hPa without humidifier; < 0,9 hPa with humidifier
  • Noise level - < 30 dB(A) at 10 hPa  




  • Counters- stand-by time, turbine running time, therapy time, filter age 
  • Permanent display- pressure, bargraph, Date, time, softstart ramp, alarm clock tidal volume (Vt), battery charging symbol, pressure unit (hPa, mbar, cmH 2O)
  • Comfort functions- start-stopp-automatik, softstart ramp, leakage test, mask calibration, flex pressure adjustment I-Flex / E-Flex, automatic start after power failure, date-, time and wake-up function, mask alarm. 





Therapy data Internal SD card
Central apnea, obstructive apnea, mixed apnea, hypopnea saved saved
Airway constriction, snoring, hyperventilation saved saved
Leakage saved saved
Base Pressure Only saved, when I- Flex or E- Flex are selected, but not active Only saved, when I- Flex or E- Flex are selected, but not active
Therapy Pressure (low resolution). No FLEX pressure changes visible saved not saved 
Therapy Pressure (high resolution), respiration flow, relative respiratory volume. FLEX pressure changes visible not saved saved
Storage Time </= 30 days </= 2 years



Aquapoint 2 

  • Dimensions-(w x l x h) 100 mm x 145 mm x 109 mm
  • Mass approx.- 280 g (without water)
  • Power supply- 24 V DC
  • Power consumption- 0 - 22 W
  • Heating levels- 5 stages + off
  • Max. filling capacity- 220 ml 



Powerpack point 2 (Not included)

  • Dimensions- (w x l x h) 160 mm x 45 mm x 70 mm per battery
  • Mass approx.- 300 g per battery
  • Power supply- 11.1 V DC per battery
  • Capacity- 2200 mAh per battery 



Filter system point 2

  • Dimensions- (w x l x h) 153 mm x 45 mm x 31 mm
  • Mass approx.- 50 g
  • Coarse filter- Polyurethan on polyester based 80 ppi (pores per inch), 30 kg/m³ (material density)
  • Fine filter- Polypropylen Precipitation of particles ≥ 1 µm: ≥ 89% at ω ≤ 1 m/s (particle velocity) ≥ 99% at ω ≤ 0,2 m/s (particle velocity) 


Aquapoint2 Humidifier
The aquapoint 2 is a plug-in warm-air humidifier for the respiratory therapy device point 2. It is intended to humidify the therapy air flow, in order to prevent the mucous membranes of the upper respiratory tract from becoming dry. The heater output can be adjusted in stages from 0 to 5, as required by the patient’s individual demands. The aquapoint 2 is provided with an integrated memory ensuring that the previously set heater stage will be preserved after the therapy device has been turned off or the humidifier has been disconnected from the therapy device. In addition to normal APAP and CPAP mode the device offers the FLEXLINE mode, a pressure increase which is proportionate to the individual respiration flow during inspiration and a pressure decrease during expiration.

Nasal mask COZY Vented


An interface is a device or system that unrelated entities use to interact.
However, it seems important in Continuous Positive Airway Pressure (CPAP) or Bi-level CPAP (BiPAP) treatment due to most CPAP or BiPAP users start out with a basic mask design that is recommended by their doctor or respiratory therapist. As the user gets used to sleeping with the CPAP or BiPAP machine, they may find the masks are unable to adjust the mask enough to minimize air leakage, maintain the prescribed air pressure and maximize comfort. Understanding the importance of interface, we designed the masks with various features and also defined them into three different levels. The Cozy brings the mask constructions into a simple way, with a patent pending assembly method, Cozy has a much easier way to attach and detach the silicone cushion from frame.

  • 360° rotational elbow: Preventing tube being pulled or dragged.
  • Sampling port: Allows for measuring pressure EtCO2.
  • Medical liquid silicone construction.
  • Extra comfort cushion: Provides stable, superior and absolute comfort.