Auto CPAP POINT2 Hoffrichter with Nasal Mask Mirage FX ResMed

Code:
663
Weight:
3.000 Kgs

The product is not available anymore!

Point 2 Auto CPAP

Within a certain pressure range the device automatically controls the therapy pressure depending on the occurrence of respiratory events. In sleep phases with no events the therapy pressure is lowered. Starting obstructive events are treated effectively with a slight pressure increase. For a high therapy comfort the therapy pressure should always be only as high as necessary and as low as possible.

Features:

3 FLEX-Levels separately for in- and expiration
Data management on SD-Card
Remarkable low noise level
Battery operation possible
Tidal volume display

The device can recognize the following respiratory events:

Obstructive apnea
Hypopnea
Central apnea
Snoring
Normal respiration
Increased airway resistance

The identification of the different respiratory events is achieved via 3 channels:

Measurement of any constriction of the respiratory tract
Detection of flow limitations by measuring the flow
Detection of snoring with the help of sound detection

The combined analysis of all results facilitates a very precise differentiation between obstructive and central events. The device adjusts the therapy pressure according to the detected events as described below:

Increase of pressure for obstructive events
Decrease of pressure for central events and normal respiration

Specifications:

	Range	Steps	Point2 Auto CPAP
Pressure	4 hPa – 20 hPa	0.5 hPa
P-Ramp	4 hPa – Pressure - IPAP	0.5 hPa
P-Min	4 hPa – P–Start	0.5 hPa
P-Max	P–Start – 20 hPa	0.5 hPa
P-Start	P-Min - P-Max	0.5 hPa
I-FLEX	0 - 3	1 step
E-FLEX	0 - 3	1 step
IPAP	EPAP – 20 hPa	0.5 hPa
EPAP	4 hPa – IPAP	0.5 hPa
I-Slope	1- 3	1 step
E-Slope	1- 3	1 step
Frequency	5 – 30 bpm	1 bpm
I:E	20 - 80 %	1 %
Delay time	0 - 20 s.	1 s.
S- Frequence	On (10 bpm) Off
Mask	Nose/Nose- Mouth/Pillow
Start-Stop Automatic Calibration	Start via ENTER
Automatic	Start-Stop/Start/Off	10 min.
Mask Test	0 - 90 s.	5 s.
Ramp	0 – 45 min.	5 min.
Display Vt	On / Off
Bacterial Filter	Yes / No
Brightness	0 - 100 %	10 %
Language	deu, eng, ell, spa, fra, ita, nld, tur, plk, por, cze
P- Unit	Hpa/mbar/sm H2O
Power	Counter
Blower	Counter
Filter	Counter
Therapy	Counter
Date	Day-Month-Year
Time	Hour-Minute
Waketime	Hour-Minute

Technical Data:

Dimensions:- 170 mm x 220 mm x 95 mm (W x L x H)
Mass:- 1.51 kg
Power supply:- 100 V - 240 V AC, 50 - 60 Hz
Power consumption- < 17 W
DC operation - 24 V DC / 2.1 A (max.)
Battery operation - 2 x 11.1 V / 2200 mAh
Pressure range - 4 - 20 hPa (mbar)
Pressure variation- < 0.5 hPa without humidifier; < 0,9 hPa with humidifier
Noise level - < 30 dB(A) at 10 hPa

Functions:

Counters- stand-by time, turbine running time, therapy time, filter age
Permanent display- pressure, bargraph, Date, time, softstart ramp, alarm clock tidal volume (Vt), battery charging symbol, pressure unit (hPa, mbar, cmH 2O)
Comfort functions- start-stopp-automatik, softstart ramp, leakage test, mask calibration, flex pressure adjustment I-Flex / E-Flex, automatic start after power failure, date-, time and wake-up function, mask alarm.

SD-Card

Therapy data	Internal	SD card
Central apnea, obstructive apnea, mixed apnea, hypopnea	saved	saved
Airway constriction, snoring, hyperventilation	saved	saved
Leakage	saved	saved
Base Pressure	Only saved, when I- Flex or E- Flex are selected, but not active	Only saved, when I- Flex or E- Flex are selected, but not active
Therapy Pressure (low resolution). No FLEX pressure changes visible	saved	not saved
Therapy Pressure (high resolution), respiration flow, relative respiratory volume. FLEX pressure changes visible	not saved	saved
Storage Time	</= 30 days	</= 2 years

Aqua point 2 (Not Included)

Dimensions-(w x l x h) 100 mm x 145 mm x 109 mm
Mass approx.- 280 g (without water)
Power supply- 24 V DC
Power consumption- 0 - 22 W
Heating levels- 5 stages + off
Max. filling capacity- 220 ml

Powerpack point 2 (Not included)

Dimensions- (w x l x h) 160 mm x 45 mm x 70 mm per battery
Mass approx.- 300 g per battery
Power supply- 11.1 V DC per battery
Capacity- 2200 mAh per battery

Filter system point 2

Dimensions- (w x l x h) 153 mm x 45 mm x 31 mm
Mass approx.- 50 g
Coarse filter- Polyurethan on polyester based 80 ppi (pores per inch), 30 kg/m³ (material density)
Fine filter- Polypropylen Precipitation of particles ≥ 1 µm: ≥ 89% at ω ≤ 1 m/s (particle velocity) ≥ 99% at ω ≤ 0,2 m/s (particle velocity)

Nasal Mask Mirage FX ResMed

Noticeably light weight and easy to disassemble for cleaning, the Mirage FX was designed with the user in mind. With fewer contact points, a softer headgear, and a balanced pressure design this mask takes a step forward in comfort.
Only 4 parts. The Mirage FX minimalistic design only has four parts to make cleaning and maintenance easy: the headgear, the frame, the cushion, and the quick-squeeze elbow.
Butterfly Wing Forehead Support. The forehead support is designed to easily flex to the needed position for a better fit. This design also only allows the headgear and not the plastic to come in contact with the skin.
Squeeze-Tab Elbow. This design is long in coming for CPAP masks. The squeeze-tab elbow makes connecting and disconnecting the hose to the mask a breeze. Just squeeze the sides of the elbow to release the hose. No more worrying about finding the right clips in the middle of the night.
Dual-wall, Spring Air™ Cushion. This cushion is designed to provide even air pressure distribution through all sides in order to reduce pressure points. The cushion also provides extra softness for the bridge of the nose.
Diffused Vent Design. The air vents are designed for quiet and gentle air diffusion to reduce noise and discomfort for a bed partner.
SoftEdge™ Headgear. The headgear is soft to the touch and is designed to help provide a fit through the night.