.jpg){kind=logo}
TORSO SUPPORT AM-WSP-07
- Code:453
- Weight:0.700 Kgs
HIGH DORSOLUMBAR BACK SUPPORT WITH DOUBLE CLOSURE PANELS
Product Description
Dorso-Lumbar back support AM-WSP-07 with double closure panels was developed in order to improve the stabilization level on dorso-lumbar area of spine, maintaining comfort and its functionality for the patient.
The Orthosis is made of strong orthopaedic rubber AirRubber II – perforated with unidirectional elasticity, which make the orthosis comfortable and breathable.
The Orthosis is made of strong orthopaedic rubber AirRubber II – perforated with unidirectional elasticity, which make the orthosis comfortable and breathable.
ActivRubber II is strong and bidirectional elasticity. It can be stretched, increasing the length and width, what improves compression. Between the braids air flows freely and skin can breathe. In addition in high compression, these rubber braids provide a gentle massage for skin. Our orthopedic rubber is very friendly for skin.
The Orthosis is provided with anatomically shaped metal stays (sweat-resistant coating), which quantity depends on the size; 4 or 6 metal stays in the Back.
The Front Panel closure is composed of four independent closures, made in semi-rigid medical laminate covered by velcro adherence textile and soft cotton terry-cloth in contact with the skin of patient. The Double closure construction makes the orthosis easy-fitting to different body shapes. (Especially recommended for women).
An asymmetric closure allows the perfect fitting on the patient body. The panel of closure is made of velcro laminate with comfortable semi-rigid foam located inside and plastic stays in the front. The system GRIP & OPEN makes the orthosis easy to assemble and disassemble.
In order to improve the functionality of the product, the orthosis is equipped with two sets of two-layer elastic stays, which offer high stabilization and support on dorsal and lumbar area.
Optionally, the orthosis AM-WSP-07 could be provided with:
-TLSO Attachement – used for maximum stabilization of spine up to T7
The Orthosis is provided with anatomically shaped metal stays (sweat-resistant coating), which quantity depends on the size; 4 or 6 metal stays in the Back.
The Front Panel closure is composed of four independent closures, made in semi-rigid medical laminate covered by velcro adherence textile and soft cotton terry-cloth in contact with the skin of patient. The Double closure construction makes the orthosis easy-fitting to different body shapes. (Especially recommended for women).
An asymmetric closure allows the perfect fitting on the patient body. The panel of closure is made of velcro laminate with comfortable semi-rigid foam located inside and plastic stays in the front. The system GRIP & OPEN makes the orthosis easy to assemble and disassemble.
In order to improve the functionality of the product, the orthosis is equipped with two sets of two-layer elastic stays, which offer high stabilization and support on dorsal and lumbar area.
Optionally, the orthosis AM-WSP-07 could be provided with:
-TLSO Attachement – used for maximum stabilization of spine up to T7
Available Sizes:
Properties:
- PATIENT-FRIENDLY PRODUCT – The lumber support is made of cotton orthopaedic rubber containing mainly cotton which is neutral to the skin.
- HIGH EFFECTIVENSS OF STABILIZATION – thanks to the anatomically shaped nibs and set of tightening tapes it was possible to achieve very effective stabilization.
- SAFETY – the front securing tapes increase the safety of usage of the product and eliminate the possibility of the uncontrolled opening of the device.
- COMFORT OF USAGE – the product is light and comfortable to use.
- HIGH EFFECTIVENSS OF STABILIZATION – thanks to the anatomically shaped nibs and set of tightening tapes it was possible to achieve very effective stabilization.
- SAFETY – the front securing tapes increase the safety of usage of the product and eliminate the possibility of the uncontrolled opening of the device.
- COMFORT OF USAGE – the product is light and comfortable to use.
Indications:
- Pre- and Post-Surgical Stabilization
- Degenerative Spinal pathologies on Lumbar area
- Disc Hernia
- Lumbar Muscles and Ligamentous Strains and Sprains
- Postural Support
- Chronic Low Back Pain
- Rehabilitation and Prevention
- Spondylolistesis of the loin area
- Deformation of the loin-back area of the spine
- Discopathy.
Contraindications:
- fresh wounds
- excoriations
- skin eczema
- skin allergy
- arterial hypertension 3rd degree
Attention: Do not use the device in case of injuries requiring more stabilization e.g. plaster dressing.
Setting Up:
Information For Patients:
- Use only according to doctor’s advice and under doctor’s supervision
- The product should be adjusted on the patient for the first time by a doctor or qualified medical staff.
- If possible wear cotton t-shirt under the device
- Use strictly under the doctor’s supervision
- After final fitting cut off the needless Velcro tape
- Do not use the device directly after usage of cream or worm-up gel
- Usage of wrong size of the product (too small) or excessive tightening of the belts, may cause temporary problems with intestines activity and other internal organs or problems with breathing and blood circulation.
- Luck of everyday personal hygiene or wrong maintenance and washing of the product may cause excoriations or allergic reaction connected with increased sweating and bacterial flora.
Maintanence:
- Hand-wash in warm water and soap in 30° temperature
- Do not iron
- Do not use chlorine
- Dry far from the sources of heat